|
Hypertac Modular / Rectangular Connectors
HDL Series Signal Connectors
HDL connector are foot-print compatible with many ZIF connectors, for Test and other applications where frequent mating and unmating is required. A dust cover on each half of the connector housing reduces contamination and the positive wiping action of the patented hyperboloid contacts helps to prevent pins bending during mis-alignments. |
|
|
 
|
The unique Hypertac socket ensures a low insertion and withdrawal force, with low electrical resistance and excellent performance under vibration. The connector is supplied with a cable clamp, extra polarising and crimp contact terminations. A finger operated jackscrew provides positive ® mating with 180° operation |
| |
|
|
|
| H Series Modular Connectors |
|
|
Designed for high-density test applications, H series Mixed-technology connectors can replace multiple discrete signal, coax and power connectors by integrating as many as 775 Hyperboloid contacts into a single connector housing, or 2200 contacts in double-frame versions. |
| This can reduce the total size of a test rig by up to x4 as well as lowering overall cost and improving reliability. The insertion force, and time, needed to mate a single H series connector is significantly lower than the force required to mate multiple D-type or DIN41612 parts and a half-turn lock mechanism means that securing an H series part is quicker than conventional jackscrew terminations.
|
| Build options |
|
 |
Rack & Panel Applications |
 |
|
Standard |
|
|
With Keying System |
|
|
With Locking System |
|
 |
With Float Mounting |
|
Cable Applications |
|
|
Hooded with Round or Flat Cable Security Clamps |
|
|
With Jack Screws |
|
Programming Applications |
The H Modular System is comprised of two basic elements: Modules and Mounting Frames.
 |
Modules make up the connector elements of the system. Three styles of contacts are available, signal, power
and co-ax. These contacts are housed in plastic blocks which can be built up into many varied permutations
and fixed securely within a frame. The frame can range from a basic one which consists of 2 side rails and
2 end caps, up to a more complex version with 1/2 turn mating devices, jackscrews, hoods, cable clamps, etc.
Frames are available in various standard lengths. |
| |
|
|
| |
|
|
|
|
