| Harwin |
 |
|
|
|
NEW rugged Hot Shoe connectors |
 |
Mil-spec data connectors at COTS prices |
|
Mixed-technology connectors save space |
|
Hi-rel connectors almost double available contacts |
|
Cable harness for hi-rel applications |
 |
Hood kits cut the cost of hi-rel cable assemblies |
| |
|
|
| |
| NEW rugged Hot Shoe connectors |
|
| |
| New 8, 12 and 16-way versions of Harwin’s rugged Hot Shoe connector technology enable rapid and simple connection, yet tolerate mating misalignment and resist dust, water, and chemical ingress. Previously available only in custom configurations, standard Hot Shoe connectors employ spring-loaded contacts, which maintain a positive contact force against the mating half of the connector, ensuring reliable connection even under the most demanding conditions. |
Datasheet  |
| |
|
| |
| Mil-spec data connectors at COTS prices |
|
| |
| With over 7.8 million configurations of signal and power, Harwin high-reliability Datamate 2.00mm connectors conform to Mil-Std at COTS pricing. Datamate's four-leaf beryllium copper clip ensures 500-cycle endurance with shock resistance to 981m/s and resistance to 10-200hz vibration of in for high-speed data-transmission applications |
| Datasheet |
| |
|
| |
| Mixed-technology connectors save space |
|
| |
Combining coax, signal & power contacts in a single jackscrew connector, Datamate Mix-Tek connectors cut board space and connection times for high mating frequency and space-constrained applications. Contacts are rated at up to 6GHz for coax, up to 20A power, and up to 3.3A for signals with male PC tail and female crimp, male crimp and female PC tail termination options. They mate with known industry equivalents to allow retro-fitting and comply with BS9525-F0033, CECC 75101-008 and MIL C 55302.
|
More about Datamate Mix-Tex 
Datasheet |
| |
|
| |
| Hi-rel connectors almost double available contacts |
|
| |
| A new Datamate connector offers up to 96 contacts combined with low insertion force. The M83 three-row connector incorporates specially-designed female contacts that require a mating force of only 0.2 to 1N, yet delivers the same high-reliability performance as existing Datamate connectors. Conforming to BS 9525-F0033 M83 connectors can withstand high levels of shock, acceleration and vibration in addition to a large number of mating cycles, all without loss of performance. M83 connectors can combine mixed signal, power and coax contacts. |
| Datasheet |
| |
|
| |
| Cable harness for hi-rel applications |
|
| |
| Flexible, high-quality cable harness from Harwin addresses the needs of OEMs in high-reliability applications such as military, aerospace, medical and industrial controls. The assemblies are based on Harwin’s high-reliability Datamate interconnect range but can also include components from other manufacturers as well as high-specification crimping. Harwin cable harnesses have been developed for use in aircraft control panels, undersea exploration equipment, military communication systems and flight-line safety checks. |
| Datasheet |
| |
|
| |
| Hood kits cut the cost of hi-rel cable assemblies |
|
| |
| New J-Tek Hood Kits from Harwin allow customers make their own robust cable assemblies based on Datamate high-reliability connectors. The kit comprises a J-Tek Datamate connector with a hermaphroditic-style hood and pre-fitted jackscrews. Separate screws are provided for joining both halves of the hood to provide a very strong and ergonomic connection. The hood kits eliminate the need for a special over-moulding on cable assemblies and are available in 6-, 8-, 10-, 12-, 14-, 20-, 26-, 34-, 42- and 50-way versions and can be used in any cable-to-board or cable-to-cable assembly requiring J-Tek Datamate connectors. |
| |
| |
|
| |
